2025.02.06
1. Printer Driver
-. Fixed the printing speed to Normal when printing the Test Page

2025.01.09
1. Printer Driver
-. Bug fixed for orientation in layout tab

2. Etc
-. CleanPrinter : Added comment for laminator model

2024.09.19
1. Printer Driver
-. Added k-zone

2. Etc
-. DDInstall : Modify it so that the network can be manually installed simply by entering the IP address

2022.10.07
1. Printer Driver
-. not changed (keep previous version)
2. Etc
-. Bin file changed for installing driver on windows 11 22H2 OS version

2022.09.02
1. Printer Driver
-. Bug fixed for network install failed error
-. Network installation is possible just by entering the ip address

2022.01.21
1. Printer Driver
-. Bug Fixed for MS text encoding in Internet Explorer
-. Supported Automatically send PC Authentication Code
-. Fix MotionErrorStatus

2. Etc
-. DDInstall : Disabled CheckPapers
-. DDInstall : Added copying SmartComm70.dll to C:\Windows\SysWow64
-. NetAdmin : Supported SNMP
-. NetAdmin : Bug fixed listing duplicated printer

1.24.243
-. added 600,1200dpi
-. Optimized diffusion dither for 600 and 1200 dpi
-. added k-zone

1.20.345
-. added SMART-21

1.24.243
-. added 600,1200dpi
-. Optimized diffusion dither for 600 and 1200 dpi
-. added k-zone

1.20.345
-. added SMART-21

2024.11.27
-. supported, supported SMART-81 600 DPI

2024.04.25
-. upgraded, upgraded pcsclite from 1.8.11 to 1.9.5
-. upgraded, upgraded ccid from 1.4.8 to 1.4.36
-. supported, supported OK5122, OK5127 in the network module

2024.03.29
-. added, added UI for seleting TLS version.
-. added, added SPOOLING in the OCP Definition to do not spooling

2024.02.23
-. fixed, fixed configuration data of the sample card for SMART-81
-. fixed, fixed moving to IC and RF position for SMART-81
-. fixed, fixed SetLCDText for SMART-81
-. added, added supporting PRN dump
-. added, added printer description SOLID-810 to NetAdmin
-. fixed, fixed displaying delay for network state
-. moved, moved btunnel, vfimage, gpioctl, ocpbarcode to extended file system

2024.01.16
-. fixed, fixed missing usb storage driver in the previous kernel
-. added, added LCD error message for scanning barcode

[ 1.02.95 ]
- modified to show the firmware version and serial number in the LCD on SMART-51

[ 1.02.92 ]
- modified the YStartPosition range from +- 600 to +-900
- fixed the card out error when booting on with the laminator attached

[ 1.02.90 ]
- fixed the function to set the error card bin (3rd tray) if the compact multi-hopper is installed and the inner tray option is activated
when the initialization and Card Out command to the front side

[ 1.02.87 ]
- fixed the function to send the data on the normal readable MS track except for the track that MS read error occurs
- added the function to adjust the RMP value automatically when YMCKO (100) ribbon is installed
- changed the criteria of color detect level when P-ribbon is installed to fix the YMCKOK ribbon issue with SMART-31
- added the function to print a long card with up to 120mm width
- added the function to print a rewritable card without erasing on SMART-31R

[ 1.02.73 ]
- added the high-speed mode when printing rewritable card first time (6 - 7sec)

[ 1.02.72 ]
- supported the extra internal hopper in the SMART-70 multi-hopper (KIOSK)
- added the function to control the SMART-70 multi-hopper directly (KIOSK)

[ 1.02.64 ]
- fixed the bug that print position on panel is shifted depending on the amount of ribbon remaining.
- fixed the bug that printing wasn't counted when 600, 1200 DPI with K ribbon
- supported the YMCKOKR ribbon
- supported the compact multi hopper on the driver
- added the function to set the direction of the cleaning process
- added the function to set the Public key in the Laminator
- added the logic to occur init error when flipper out sensor detects a card while initializing
- modified the option to fix the direction of cleaning to backside if the multi-hopper is installed
- modified the option to consider the panel is black if the RGB value is under 85% with BO ribbon
- modified the logic that considers the card is inserted after Card In action even though Card In sensor doesn't detect a card on SBS mode & portable mode
- modified the logic to enter the cleaning process that Top cover is opened and ribbon is removed when booting up while right LED button is pushing
- fixed the bug that the K ribbon doesn't count the printing issue on 600 & 1200 DPI

[ Model ]
SMART-51 / SMART-31 / SMART-21 / SMART-70 / SMART-70X / SMART-50 / SMART-30 / SMART-81

[ 2.5.3.1 ]
- updated Japanese translation
- modified the continuous printing logic of the Database Tab
- fixed the Media Mask printing on SMART-81
- fixed the MS encoding data write
- updated ASCII code hexadecimal input function to MS Encoded empty cell fill numbers

[ 2.5.3.0 ]
- modified the Magnetic Stripe Encoding pop-up and UI
- modified to retain PNG file when resizing image
- fixed on the camera capture when adding/modifying cards
- fixed to disappearance of design after setting MS Encoding
- updated manual
- fixed to allow Card Insert when printing with SMART-70 MultiHopper and printing with Encoding

[ 2.5.2.9 ]
- fixed Unicode related bug

[ 2.5.2.8 ]
- fixed to import data when changing a sheet after importing Excel
- modified to update the Preview when Design > Save > Tab
- updated SmartComm2.dll

[ 2.5.2.7 ]
- added Plug-in, Plugin_briquet Encoding
- modified to run the program without installation of the printer driver
- updated Plug-in tab UI
- updated 'Bring Excel' and 'Cell Format' features and UI
- updated SmartComm2.dll, SmartComm70.dll
- updated the manual