2022.09.02
1. Printer Driver
-. Bug fixed for network install failed error
-. Network installation is possible just by entering the ip address
-. Bug Fixed for MS text encoding in Internet Explorer
-. Supported Automatically send PC Authentication Code
-. Fix MotionErrorStatus
2. Design Software
-. Fixed an issue where white letters did not appear on the mono ribbon
-. RealtimeData data update related fixes.
-. Added ability to change print queue job status and remove selected cells
-. Change to print queue method
-. Handling when a number comes first in the input field
-. Add function related to ExcelAdd
-. MS encoding related logic change
-. Added scenario for when driver does not exist
-. Fixed a bug when disabling track data related to MS encoding
-. Webcam bug fix
-. Print support Smart81( HomeTab, DB Tab)
-. Additions related to NFC RF encoding
-. Shading when Smart81 driver is selected
-. Fix IPHLO operation error
2023.07.07
1. Printer Driver
-. Add a feature to print only the K-panel through the Mask Image
-. Fix for retransfer printer : Changed color profile
-. Fix for thermal printer : Improved print quality with a rewritable ribbon
2. Design Software
-. Fixed an issue where white letters did not appear on the mono ribbon
-. Fix for thermal printer: Fixing preview malfunction in vertical layout
-. Fix for retransfer printer: Unable to resize background in vertical layout
-. Fix not to proceed ms-encoding and surface-printing when personalization is rejected for wrong card
-. Update the ICM profile and DLL
-. Update the libraries being used(OpenCV, Xtreme Toolkit Pro)
-. Change the development environment to VS2019
-. Modify EditView to display correctly for 10 types of printers
3. Etc
-. DDInstall : Modify it so that the network can be manually installed simply by entering the IP address
[ 2022.09.02 ]
-. Bug fixed for network install failed error
-. Network installation is possible just by entering the ip address
-. Bug Fixed for MS text encoding in Internet Explorer
-. Supported Automatically send PC Authentication Code
-. Fix MotionErrorStatus
Controlador de impresora_SMART-51,31 & 21 for LINUX 64bit | 2022.11.16
[1.01.13]
- Cabezal de impresión compatible de 600 DPI (S81H)
- Cambiado para permitir el SBSCommand durante el proceso de precalentamiento
- Cambió el Modo de Separación 3
- Cambió el valor predeterminado de Bloquear
- Se modificó la función SBSCardOut cuando se instaló BendRemedy
- Cambió la lógica de búsqueda de cinta YMCKK
[1.01.06]
- Añadida la función TagTest en el panel LCD
- Mejora de las funciones de lectura/escritura de etiquetas
- Corregido el error de la acción CardOutBin
- Corregido el error que no puede obtener Dump
- Corregido el error para mostrar System Ready con antelación antes de la finalización de PreHeating
- Corregido el error de mostrar al fabricante de película equivocado en la pestaña de Servicio del controlador de impresora
[1.01.01]
- Se ha añadido la función de mover una tarjeta basada en el sensor mientras se retransfiere una película
- Se ha añadido la función para establecer la temperatura de retransferencia/estado en el panel LCD
- Se añadió la función para establecer la temperatura inicial/objetivo de PreHeating, y Tiempo fuera cuando se precalenta
- Mejora el problema de que la película está rota
- Cambió los criterios de la función de precalentamiento
- Corregido el error de 'Network Config - DataAbort'
- Corregido el error de cuenta atrás de Tag
- Corregido el error que BendRemedy no puede ser apagado en el driver de impresora
[1.00.96]
- Añadido a la función para limpiar el panel LCD
- Corregido el error de la función de limpieza
[1.00.92]
- Apoyó la impresión 600DPI
- Apoyó el módulo BendRemedy
- Apoyó la función YMCK Split
- Añadido el comando SBS de Lam HeadUp/Down
- Añadido el comando SBS para BendRemedy
- Se añadió la función Erase Tag, Función de inicialización de palabras clave de bloqueo
- Mejoró la acción Rf CountDown
[1.00.71]
- Cambió la posición de espera de la tarjeta al lado derecho del rodillo de retransmisión después de la acción de la tarjeta.
- Cambió la posición de espera de la tarjeta al lado derecho del rodillo de retransmisión cuando se imprimió la parte trasera en el modo más rápido
- Modificado el estado de error a normal incluso si el cartucho Hopper se abre cuando el mensaje 'Count Zero' es mostrado
[1.00.68]
- Se añadió la función para ajustar automáticamente la ganancia de la etiqueta
- Modificado el modo de separación 3 de acción
- Modificado a la acción CardOut para mantener una tarjeta incluso si la reposición de una tarjeta
- Modificado el tiempo de filtro del sensor CardOut a 50ms
- Modificado a la velocidad de la acción de detección de película, guardado en Backup
[ 1.02.73 ]
- added the high-speed mode when printing rewritable card first time (6 - 7sec)
[ 1.02.72 ]
- supported the extra internal hopper in the SMART-70 multi-hopper (KIOSK)
- added the function to control the SMART-70 multi-hopper directly (KIOSK)
[ 1.02.64 ]
- fixed the bug that print position on panel is shifted depending on the amount of ribbon remaining.
- fixed the bug that printing wasn't counted when 600, 1200 DPI with K ribbon
- supported the YMCKOKR ribbon
- supported the compact multi hopper on the driver
- added the function to set the direction of the cleaning process
- added the function to set the Public key in the Laminator
- added the logic to occur init error when flipper out sensor detects a card while initializing
- modified the option to fix the direction of cleaning to backside if the multi-hopper is installed
- modified the option to consider the panel is black if the RGB value is under 85% with BO ribbon
- modified the logic that considers the card is inserted after Card In action even though Card In sensor doesn't detect a card on SBS mode & portable mode
- modified the logic to enter the cleaning process that Top cover is opened and ribbon is removed when booting up while right LED button is pushing
- fixed the bug that the K ribbon doesn't count the printing issue on 600 & 1200 DPI
[ 0.02.07 ]
- El S51L puede funcionar aunque la película de laminado no se inserta o el balance de la película es 0.
(El firmware de la impresora S51 debe ser 1.02.72 o superior)
[2.4.4.7]
- Updated the image library and Excel library
- Updated the Plugin_briquet(NTAG RF encoding)
- Updated the SmartComm2/SmartComm70.DLL
- Fixed the bug of magnetic encoding on SMART-51 & SMART-70
- Fixed the bug of image capture and test capture menu
- Fixed the edit screen when the SMART-81 is selected
- Fixed the bug when rotating or editing an image
- Fixed the UI bug when 600 dpi is applied
- Fixed the bug on Code 128 1D Barcode
- Fixed the bug on row to show whether the printed or not / text object / location / search function on Database tab
- Fixed the bug to save the preview on a paticular row on Database tab
- Fixed other minor UI bugs
[2.4.4.6]
-. Enhanced the time to add the objects
-. Updated SMART-81 color profile and SmartComm2.dll
-. Added the alarm function when a file doesn't exist on the path of the image when importing the Excel
-. Fixed the bug that loading image is broken
-. Fixed the bug of the DB table name error
-. Fixed the bug that the preview image is not shown on the database record of the Database tab
[ 2.4.4.3 ]
-. Fix the bug about the SMART-70 IPHPO combination
-. Fix the bug about the SMART-81
[ 2.4.4.1 ]
-. Apply a new Color Profile on SMART-81
-. Apply an Edit View on SMART-81
-. Apply SmartComm2.dll v2.1.70.1 -20230613